Neel Distributors

• Collect blood sample
• Insert the filled cuvette and press down gently
• Results appear in less than two sec

• Results in less than two seconds
• Reagent-free microcuvettes
• 2½ years cuvette shelf life
• Dimensions: 150 x 90 x 40mm

• 'Always-on' technology. Ready for use immediately
• Automatic self-check between each measurement
• Symbol-based display
• Factory calibrated with permanent calibration
• No additional calibration required

• Hemoglobin results in less than two seconds 
• Capillary, venous or arterial blood  (EDTA and Heparin anticoagulant can be used)
• Compact in size and weighs just 180g
• No maintenance required. Auto self-test
• Integrated rechargeable battery (40 days or 10,000 tests continous use)

• Photometric method using a broad spectrum
• Operating ambient temperature 10 °C to 42 °C
• Measuring range: 0 - 25.5 g/dL
• Imprecision (within run): CV <1 %
• Calibrated against HiCN reference method according to ICSH

• Sample volume <10 µL
• Shelf life of up to 2.5 years, even after the bag has been opened
• Storage temperature: 0 °C ­- 50 °C (- 30 °C ­- 70 °C up to 24 hours)
• Easy to pick up and handle with gloves
• CE marked
• Manufactured in Germany

• High quality blood components due to improved filtration efficiency and performance
• User friendliness due to easy handling
• High yields due to reduced hold-up volume
• Time saving due to shortened filtration time
• Melt blown non-woven polyester fibre
• Non ionic coated fibre surface
• Neither positively nor negatively charged
• Excellent wetting characteristics
• High biocompatibility

Leukocyte Filters Bio R for Single and Double Unit.  Ideal for Thalessemia , Sickle cell anemia patients Surgeries etc. 

Superior Raw Material: Guarantees quality and biocompatibilitySuperior Technology: Ensures high performanceSuperior Design: Designed with our customers in mindComplete Safety: Safety features including needle injury protector (NIP), Leur adaptor with holder (LAH) and pre-donation sampling bag (PDB), for the donor, phlebotomist and recipient

Single Donor Apheresis System  We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

3-in-1 Device for Blood Bag Tubes

The M STRIPPER by MITRA is a versatile, skid-proof 3-in-1 tool designed for stripping, cutting, and sealing blood bag tubes with precision and ease. Built with durability and operator comfort in mind, it ensures efficient, reliable performance in blood banks and transfusion centers.

✔ Stainless Steel Build – Rust-proof, long-lasting body
✔ Lightweight Design – Easy to handle during long operations
✔ Spring-Powered Handle – Provides uniform pressure while pressing, with automatic recoil for easy release
✔ Screw-less Rollers – Prevent loosening for consistent operation
✔ Extra Sharp Cutting Edges – Ensures smooth and precise cutting
✔ Hot Melt Plastic-Coated Handle Covers – No gaps between arms and covers for added safety
✔ Ergonomic Handle – Comfortable grip for fatigue-free usage
✔ Roller Guide – Prevents damage to tubes during stripping
✔ Manual Tube Sealing – Reliable aluminum ring sealing system

• Combines 3 essential functions in one device

• Durable, safe, and skid-proof design

• Ideal for blood banks, hospitals, and transfusion centers

• Speed holding accuracy +/- 10 RPM

• 9 acceleration & 10 deceleration profiles including coasting

• Temperature range from -20°C to +40°C

• Low noise level (≤ 55db)

• Choice of 3 wind-shielded rotors to process 6, 8 & 12 blood bags per cycle

• Tropicalized to run from 0°C to 40°C & RH up to 95%

• Brush-less induction motor with frequency drive, practically maintenance free

• Advanced user friendly microprocessor control

• 99 programs memory & pre cooling

• Programmable centrifugation parameters for accurate control

• On board real time data logging, connectivity via RS 485 port

• Dedicated software for data analysis & reports

• Facility to set and indicate RPM or RCF

• Simultaneous display of set & run parameters

• Self-diagnosis of program errors

• Microprocessor controlled automatic lid opening with touch button

• Log of latest 50 run records on LCD display

• Display of real time & Date

• Castor wheels with floor standing jacks for vibration free run

• Emergency lid opening provision in case of power failure

• Safety interlock to prevent lid opening during centrifugation

• Imbalance cut-off with indication

• Safety key lock to prevent unauthorized use

• Rotor over speed protection

• Alarms for imbalance, lid open, over temperature

• Password protection for authorized access

REMI Blood Bank Fridge BR 300/400

BR 400 / 500 are high capacity refrigerators for bulk storage requirement of whole blood and packed red cells.Standby refrigeration with alternately working compressors provides backup in emergency situations
Salient Features of High Capacity Storage Unit

Dual compressor system provides back up in emergency situation (Optional)

Auto defrost mechanism to prevent frost formation

Self-diagnosis & display of errors

Safety Thermostat for avoiding negative temperature

Settable points for

High / low temperature alarm point

Buzzer off time

Audio/VisuaI alarms for

Temperature high / low

Power failure (only visual)

Sensor open / Short

Door Open

Compressor on (only visual)   Power on (only visual)

Compressor Functioning & Holdover Time

Auto Door Closure

• Automatic rotor identification, ensures operator safety

• Stainless Steel centrifuge Chamber, easy to clean

• Brushless Induction motor with variable frequency drive

• Microprocessor controller with digital display

• Stable speed output even under unstable voltage conditions

• Smooth & soft start

• Low sample temperature rise

• Inverter fault detection with auto shutdown

• 7 segment LED display of speed (R-8C Plus/R-12C Plus)

• Alphanumeric LCD display of speed & RCF (R-8M Plus)

• Selection of 3 acceleration & deceleration profiles (R-8M Plus)

• Digital countdown timer & continuous run

Efficient | Ergonomic | Reliable

The XPRESS - M is a specially designed plasma expressor engineered to separate blood components with precision and ease. Equipped with a high-tension spring mechanism, it ensures quick and smooth transfer of plasma into secondary bags.

Designed with an ergonomic structure, XPRESS - M guarantees long-lasting, trouble-free operations, making it an ideal choice for blood banks and healthcare facilities.

✔ Clear Visibility – See-through front panel for monitoring layer movement
✔ Quick Plasma Expression – Spring-loaded transparent compression plate
✔ Customizable Operation – Adjustable spring tension
✔ Ergonomic Design – Handle designed for easy, fatigue-free operation
✔ Stable Base – Suction holders ensure firm grip during use
✔ Durable Build – Metallic base with rounded ABS body
✔ Hygienic & Long-lasting – Rust-free, easy-to-clean surface

• Enhances efficiency in plasma separation

• User-friendly and operator safe

• Built for reliability and durability

• Motorized metallic roller & one free roller for smooth tube stripping
• Designed for left / right hand operation with equal convenience
• Easy to use hand roller
• Portable battery pack, backup 1000 cycles
• Automatically strips tube once the metallic handle is pressed
• Uniform radial force across the tube prevents abrupt manual pressure
• Auto stop feature for overload protection
• Guiding groove for correct tubing position, fed through rollers
• Suitable for all commercially available blood bags

Salient Features:

• Precise control on volume collection (Microprocessor based system), best in class accuracy (deviation ≤ 1%)

• Automatic tarring of blood bags

• Automatic change over on battery mode in case of power failure (Battery backup 10 hrs)

• Pause facility to temporarily suspend the donation process

• Gentle & smooth motorized clamping of blood bag tube prevents damage to the live blood cells

• Broad base tray with non-slip surface accommodates all type of blood bags

• Automatic release of the bag when lifted, after donation

• Removable magnetic cradle: Single grip tray removal

• Recall of last blood collection parameter

Audio / Visual Alarm

• Flow rate (< 20 ml/min or > 180 ml/min),

• Completion of collection

• Battery depletion

Visual indication & displays

• Set volume (ml)

• Actual volume (ml)

• Collection process status (Run / Stop / Pause)

• Actual weight (gm)

• Flow rate (ml/min)

• Time of collection (min)

• Battery status